WalkBy / DriveBy

MBUS (T1, T2, S1-m, S1, S2, C1, C2)

The Wave WalkBy / DriveBy AMR (Automatic Meter Read)System, provides the utility with the ability to read a meter without entering the home. Based on proprietary 433/865-867/868/915 MHz MBUS radio technology, the WaveWalkBy AMR solution gives the energy supplier fast, reliable meter readings. This data can be used by the energy supplier to provide accurate upto date billing, removing the need for estimated readings on the occasions when access to the meter is not available. The Wave WalkBy AMR module can be retrofitted to any CubixRS/RPG Raychem diaphragm gas meter, allowing the meter owner the possibility to implement AMR at a point in time after the meter has been installed. By utilizing up to date RF technology the transmission distances are long. This usually determines that the meter reader can read whole apartment blocks without the need to enter the building. The data can be downloaded from the Wave Walk By AMR module into a hand held terminal or any Android phone. Once the reads have been made the meter reader receives a confirmation message and can move on to the next site. Alarms will also be sent to the HHT/Mobile Phone in the event of a Wave WalkBy AMR module having a low battery, or if a tamper is thought to have taken place. Once that data is received it can then be transmitted to the Cloud Data base via GPRS or GSM removing the need for the meter reader having to return to the office. Having reached the Cloud data base the energy utility now has the option to use the Wave operating software to produce bills, sends SMSs/e-mails, and generally manage their database.

MODBUS

The Module is designed to collect meter pulses, store and transfer. The module is mounted in specific area provided on meter and used for remote reading and programming. By means of M-Bus module primary address, M-Bus ID Number and pulse input can be programmed via M-Bus network.

Features

  • M-Bus Slave meets standard EN1434-3 and 13757
  • Configurable baud rates upto 19, 200
  • Supply from battery- Meter Bus active for data transmission
  • Collision detection
  • Tamper detection
  • Operating Temperature: 0 - 550 C
  • Operating Humidity: 0 ? 95%rH,
  • non condensing IP65
  •  

    Technical Data

    The Wave Pay As You Go Token less (PAYGTL) System provides Automatic Meter Reading (AMR), together with the potential for the utility to receive payment for the gas before it is used. The PAYGTL meter differs from the standard AMR offering, in that there is a solenoid valve fitted on the meter inlet. The wave module monitors the customers' account checking the gas consumed against the credit available. Should the account become zero then the gas supply will be shut off. A customer can top up his account at a registered pay facility, by credit card over the phone /online or by direct debit. The display on the module provides the customer with realtime information regarding the credit balance

    Advantages

    • Improves cash flow and reduces cost to the utility
    • No requirement to read the meter
    • Near real time data
    • Remote disconnect for non payment
    • No need to produce a bill
    • Reduction in back office staff
    • Average saving of 15 to 20% per Annum